259/16  «ÍÂÇÔÀÒÇ´ÕÃѧÊÔµ 70 (¾ÑªÃÒÀÒ)  á¢Ç§µÅÒ´ºÒ§à¢¹
ࢵËÅÑ¡ÊÕè ¡Ãا෾ÁËÒ¹¤Ã 10210

02-9732255 fax 02 9732395

 

 

 
 
 
Category >> Product / Ãкº·Ó¤ÇÒÁàÂç¹ / HELDON ...
Vibration Eliminators
 
Vibration Eliminators
 
Introduction
  • The main function of a vibration eliminator is to absorb compressor vibration and stop its transition into the pipe work and components of refrigeration or air-conditioning system.By isolating the compressors vibration the risk of damage to pipe work and the associated components is reduced.
  • Manufactured from a deep wave pitch corrugated stainless steel hose they are then enclosed in a tightly interwoven stainless steel braid for greater support and security.hose and the braid are reinforced at each end by overlapping stainless steel ferules with high temperature brazed solid copper connections.
  • Heldon Vibration eliminators are suitable for all fluorinated refrigerants and their associated oils dependent on operating pressures and in all lines of refrigeration and air-conditioning systems. When used is suction lines the entire vibration eliminator should be sealed with in an insulation layer.
Installation Considerations
    a. Vibration eliminators should be installed as close as possible to the compressor.
    b. Vibration eliminators are not designed to compensate for pipe work misalignment and should only be installed in straight lines.
    c. Vibration eliminators are not designed to absorb axial or torsional stress and should not be installed under compression or tension.
    d. Vibration eliminators should be installed perpendicular to the direction of vibration (inline with the compressor crankshaft).                               

Features

    Features
Designed fr aximum flow and inimal pressure drop.
Solid copper connectors.
Stainless steel hose and braid.
Stainless steel Ferules.
Individuality tested, dehydrated and sealed.
 
    Benefits
Negligible loss in system efficiency.
Easier installation with out the need for flux.
Longer service life.
Reduced chance of failure at the major stress point.
Ensuring a problem free installation.
Ensures correct installation orientation.
 
Note; Vibration eliminators are not life time components. European standards require replacement every two years.
 
Approvals
        CE
 
       
 
       
 
                                Complete stainless steel version available on request
 
                               
 
 
 
 
 
.
    àÇçºÅÔ§¤ì Download
.
Copyright © 2010 www.b-best.com All Rights Reserved.